|Product Name:||Portable Ultrasonic Flowmeter||Diameter:||DN15 ~ DN8000|
|Work Power:||220VAC/24VDC||Type:||Mass Flowmeter|
liquid filling machine parts,
vortex flow meter
Ultrasonic flowmeter uses the non-contact measurement.
In the case of continuous flow, it can quickly and exactly measure the fluid flow in the pipe.
CSB ultrasonic flowmeter is based on the principle of low-voltage and multi-pulse time difference. It sends and receives the technological measuring flow with the high precision and stable double balanced differential signal.
There are 3 types of CSB main units: wall type,handheld type and portable type.
♦Jacketed ultrasonic flow meter is convenient and efficient.In the case of continuous flow, it can quickly and exactly measure the fluid flow in the pipe.
♦ It can adapt to all kinds of pipe material.
♦It can be used in case of no power supply because of its built-in battery and it is mainly used in the process of detection.
To satisfy actual working conditions, CSB ultrasonic flowmeter series provide 3 types of sensors for customers to choose: clamped type, insertion type and pipeline type.
|Sensor Type||S1 Type||M1 Type||L1 Type||High-temperature Type||Insertion Type|
|Material||ABS||Special High Temperature Material||SS316L(CS Base)|
|Calibration||Calibrated with the Main Unit|
|Suspension Concentration||<=20000ppm and contain very small amount of bubbles|
|Lining material||Epoxy Asphalt,Rubber,Mortar,Polystyrene,Bakelite,PTFE|
|Cable||Standard Configuration:5m*2 Can Choose 10m*2 or 15m*2|
Technical data of Ultrasonic Flow meter Main Unit
|Accuracy||Better than 1% accuracy,better than 0.2% repeatablity|
|Measuring Period||500ms(2 times per second,each period can collect 128 sets of data)|
|Power Supply||220VAC,24VDC Rechargeable battery|
|Power Consumption||Current 50mA|
|Display||LCD display instantaneous flow,positive,negative,net cumulative flow,velocity|
|Signal Output||1 channel of RS485 output|
|1 channel of 4-20mA output|
|1 channel of OCT pulse output(pulse width:6-1000ms)|
|1 channel of relay output|
|Protection Level||Sensor IP68, Main Unit IP65|
|Communication||MODBUS,M-BUS,FUJI Extended Protocol|
|Other Features||Can be programmed batch(quantitative)controller and have the function of fault diagnosis|
Contact Person: Luis