|Name:||Full Automatic Cleaning In Place System||Material:||SUS304 Stainless Steel|
|Type:||Cleaning In Place System||Application:||CIP In Place System|
cip cleaning system,
clean in place system
Stainless Steel Automatic CIP Washing System Cleaning In Place System
Main structure and working principle:
This equipment mainly consists of acid-base fluid tank, clean tank, rack, cleaning fluid dispenser and pump and other components sent
1 acid: lye tank and clean water tank
Three storage tanks used for storing cleaning fluid, cleaning process requirements can be prepared in accordance with cleaning fluid composition, concentration, and by acid, lye tank of steam heating coil, the cleaning fluid can be heated to the required temperature, tank is a pressure vessel, made of stainless steel plate, barrel body thermometer equipment, barrel up and down with back and output interfaces. The top two holes and cleaning fluid inlet, the bottom also has a condensate outlet and waste outlet, clear water out of the sink device and export only, no return mouth, rinse with water is a one time emissions. The discharge pipe emissions and could no longer return to the acid, lye, in acid, lye between thetank and clean the sink. Acidbase fluid and waste water emissions in the tank connection pipe at the bottom left, open with a cover, seal the round nut, can achieve emissions.
Splitter and sent through a cleaning fluid over the external, may form a cycle of cleaning fluid return line system.
2 Rack: This rack is made of stainless steel materials, bearing in addition to cleaning liquid distributor sent all outside agencies, so that the device compact.
Contact Person: Luis